Avara Basic is a complete alarm package for motorhomes and caravans.
The package has all the functions you would expect for a safe trip, overnight, parking and storage. Smart functions and sensors work together to "understand" what is happening, ensuring greater security and far fewer false alarms than other alarm systems.
The night alarm is automatically switched off when it detects with the help of all the detectors that you are on your way out and that there is no question of a burglary. If you start driving and have forgotten to turn off the night alarm, it automatically shuts off.
"Always-on " - the most important functions of the system smoke detector, CO and propane gas detector are always on and cannot be turned off.
Avara Smart Night Alarm
For extra protection at night, turn on the night alarm by pressing the lid on the main unit. An internal alarm is then activated if external movement is detected and/or one of the intrusion detectors is triggered. The exterior motion detectors will automatically turn on an outdoor light, but will not give an indoor alarm until it is confirmed that there is activity against the wall. People passing by will therefore not trigger an alarm. If the alarm is triggered by cooking or similar, you can "hush" the alarm by pressing the lid of the main unit, which then goes into a 10-minute pause.
The intruder alarm is activated by means of a code chip. The alarm can be triggered by the intrusion detectors or by the interior motion detector on the main unit. The installed siren gives a loud warning.
When the vehicle or trailer is unoccupied or in storage, the system goes into power saving mode. The propane gas detector can therefore be connected directly to the vehicle's battery without the risk of draining it. All the other devices in this package run on their own batteries for several years.
The system monitors that all detectors work and have fresh batteries. If a detector falls out or receives a low battery, the main unit informs.
If you are technically skilled, you can install Avara Basic yourself. If you are unsure, we recommend that you ask your dealer to install the alarm.
Later upgrade
If you later want to be able to remotely control your alarm you can upgrade by purchasing a modem as an optional extra (subscription). This gives you the same functions as in Avara Basic Plus. If you want continuous moisture monitoring, you can retrofit Avara Moist moisture sensors (requires Avara modem).
The alarm's main control panel and is used to operate the alarm/night alarm inside the motorhome/caravan. Contains motion detector (PIR), CO detector and smoke detector, humidity and temperature sensor in addition to G-shock sensor. The combination of CO detector and smoke detector increases safety for early detection of fire. The CO detector and smoke detector are alwaysonand are not switched off when the alarm is deactivated. The main unit is placed above the living room door in your motorhome/caravan.
Features
Control panel for operation of burglar alarm and night alarm
Optical smoke detector
Motion detector
CO detector (carbon monoxide)
NFCreader for code chip
G-shocksensor
Motion Detector
Passive infrared
Dimensions H, W, D
31x72x102mm
NFC
13.54Mhz
Power consumption
approx. 0.1 mA.
Power supply
3 internal replaceable AA alkaline batteries
Radio communication
868 MHz band
Motion sensor that is placed in doorways, cargo areas and hatches and detects any movement in/out of the motorhome/caravan. 3 intrusion detectors are included in the basic package, and more can be ordered if required. The detectors have an internal battery with a long life expectancy.
Dimensions H, W, D
89x70x24 mm
Motion Detector
Passive infrared
Power consumption
< 0,1 mA.
Power supply
3 internal replaceable AA alkaline batteries
Radio communication
868 MHz band
Exterior detectors alert you to unwanted guests outside in Night Alarm mode. The detectors are mounted high up on the exterior wall on each side of the motorhome/caravan so that they cover all doors.
The detectors contain a motion detector that detects movement within approx. 1 - 1.5 meters from the wall and approx. 3 meters to each side. LED light turns on in the event of movement. Two exterior detectors are included in the basic package, and more can be ordered if required, for example for long cars/vehicles.
When Smart Night Alarm or Intruder Alarm is activated, one LED on each detector flashes to show that this vehicle has an active alarm.
The detector can also be used to monitor bicycle racks (night alarm). The detectors have an internal battery with a long life expectancy.
Dimensions H, W, D
50 x 218 x 45 mm
Motion Detector
Passive infrared
Power consumption normal
< 0,1 mA
Power consumption with light
350 mA
Power supply
6 pcs AA alkaline batteries
Density
IP66
Radio communication
868 MHz band
The propane gas detector is connected to a constant 12V power supply and is mounted down by the floor (5-15 cm above the floor). The detector is not switched off when the alarm is deactivated, but is always on for increased security.
A smart function provides a delay of 1 minute before an alarm is sent when gas is detected. This ensures that the accidental, brief and harmless presence of gas does not create unnecessary alarm situations.
The device has a power saving mode that ensures that the battery is not drained when the motorhome/caravan is not in use. You can also connect a backup battery if you remove the main battery during storage.
The detector does not work alone, but must be paired with the Avara main unit in order to sound an alarm.
Dimensions H, W, D
17.5 x 45 x 45 mm
Power consumption normal mode
approx. 20 mA
Power consumption in burglar alarm and save mode
approx. 0.25 mA
Power supply primary
External 5.5 – 15 V DC
Power supply backup
External 5.5 – 15 V DC
Sensitivity
Approx. 0.4% / 20% LEL
Radio communication
868 MHz band
The key fobs included in Avara Lite, Avara Basic, Avara Basic Plus and Avara Premium are used to activate and deactivate the burglar alarm.
Dimensions H, W, D
40x32x4mm
Frequency
13.54 MHz
The siren driver is the control unit and power source for the external siren that is triggered in the event of a break-in. It contains AA batteries and should therefore never be connected to an external power source.
The siren driver is mounted concealed together with the siren. It is recommended to mount the siren indoors.
Dimensions H, W, D
80 x 80 x 48 mm
Power consumption in standby
< 0,1 mA
Power consumption at active siren
approximately 250 mA, limited to approximately 500 mA
Power supply
8 pcs replaceable AA alkaline batteries
Density
IP66
Radio communication
868 MHz band
The siren is connected directly to the siren driver and placed together with it. The siren gives a loud audible warning when the intruder alarm is triggered (it is not used in Night alarm mode).
Dimensions H, W, D
53 x 50 x 63 mm
Voltage
6 – 16 V
Power consumption max at active siren
290 mA
Volume
123 dB of 10 cm. distance
Frequency
2 – 4 KHz
Rådhusgaten 91
3290 Stavern
Avara AS
Org. no. 933 097 897
post@avara.no
+47 70 31 00 86