Avara Basic Plus brings you a number of new benefits. The modem included in this package ensures that you can communicate with the alarm system via your mobile phone. You can configure who will receive alarms so that your family or neighbors are notified.
The modem also contains a GPS receiver. Thus, you can view the position of the motorhome/caravan in a map. This location can be shared with family and friends and use for tracking in the event of theft.
If you are technically skilled, you can install avara basic plus yourself. If you are unsure, we recommend that you ask your dealer to install the alarm.
Avara Basic Plus belongs to a subscription that provides access to "My Account" at Avara. When the subscription is activated, it opens for communication between the modem and Avara's cloud solution.
From "My Side", you can operate your Avara alarm online, view alarm history, locate your motorhome/caravan, share your location with friends and family and more. Here you also control your privacy settings and have full control over your own data.
Avara's cloud solution will be further developed with new features going forward. We will ensure that we always deliver one of the most complete alarm solutions on the market.
Later upgrade
If you later want to upgrade to Avara Premium, this can be done by purchasing moisture sensors as an optional extra.
1 pcs.
Main unit
1 pcs.
Modem with GPS receiver (subscription required)
3 pcs.
Burglary Detectors*
2 pcs.
External detectors with light*
1 pcs.
Propane gas detector*
1 pcs.
Siren controller
1 pcs.
Siren
2 pcs.
Key tags for activating/disabling burglar alarm*
1 pcs.
Mounting kit with strips and cables
* Multiple detectors can be purchased if needed
Main control unit used for operation of the alarm inside the motorhome/caravan. Includes an IR motion detector, CO detector and optical smoke detector as well as a moisture and a temperature gauge. The combination of a CO detector and a smoke detector increases your safety. The CO detector and smoke detector are not turned off when the alarm is deactivated, but is always on for increased safety. The main unit should be placed above the living room door in your motorhome/caravan.
Features
Control panel for operating a burglar alarm and night alarm
Optical smoke detector
Motion Detector
CO detector (carbon monoxide)
NFC code chip reader
Motion Detector
Passive infrared
Dimensions H, W, D
31x72x102mm
NFC
13.54Mhz
Power consumption
approx. 0.1 mA.
Power supply
3 internal replaceable AA alkaline batteries
Radio communication
868 MHz band
Infra-red motion sensor placed in doorways/cargo bays and detects any movement in/out of the motorhome/caravan. There are 3 burglar detectors included in the basic package, and more can be ordered if needed. The detectors have internal battery with a life expectancy of 5 years.
Dimensions H, W, D
89x70x24 mm
Motion Detector
Passive infrared
Power consumption
< 0,1 mA.
Power supply
3 internal replaceable AA alkaline batteries
Radio communication
868 MHz band
External detectors are mounted high on the outer wall, without drills or screws. Contains motion detector that detects movements within approx. 1 – 1.5 meters from wall. LED lights light up when movement is detected. 2 external detectors are included in the basic package, and more can be ordered if needed, for example, in large motorhomes/caravans. The detectors have internal battery with a life expectancy of 5 years.
Dimensions H, W, D
50 x 218 x 45 mm
Motion Detector
Passive infrared
Power consumption normal
< 0,1 mA
Power consumption with light
350 mA
Power supply
6 pcs AA alkaline batteries
Density
IP66
Radio communication
868 MHz band
The propane gas detector should be connected to 12V power and mounted down by the floor. The detector does not turn off when the alarm is deactivated, but is always on for increased safety. The unit has power saving mode which ensures that the battery does not drain when the motorhome/caravan is not in use.
Dimensions H, W, D
17.5 x 45 x 45 mm
Power consumption normal mode
approx. 20 mA
Power consumption in burglar alarm and save mode
approx. 0.25 mA
Power supply primary
External 5.5 – 15 V DC
Power supply backup
External 5.5 – 15 V DC
Sensitivity
Approx. 0.4% / 20% LEL
Radio communication
868 MHz band
The modem communicates with Avara's cloud solution. Alarm messages and alerts can then be forwarded to wherever the owner of the system chooses. Also contains a GPS unit for locating the motorhome/campervan. The device has a power saving mode which ensures that the battery is not drained when the motorhome/campervan is not in use.
Dimensions H, W, D
17x83x83mm
Connection
2G/4G/5G/NB-IOT/CAT-M1
Positioning
GPS/Galileo/Glonass/Beidou
NFC
13.54Mhz
Power consumption save mode
approx. 0.25 mA.
Power consumption 4G active
approx. 12 mA.
Power consumption 2G active
approx. 350 mA.
Power supply, primary
5.5-15V DC
Power supply, backup
5.5-15V DC
Radio communication
868 MHz band
The key tags included are used to enable and disable the burglar alarm.
Dimensions H, W, D
40x32x4mm
Frequency
13.54 MHz
The siren controller is the control unit of the external siren that is triggered in the event of a break-in. It also contains the power for the siren (battery pack) and does not need connection to an external power source. The siren controller should be mounted hidden, together with the siren, preferably in the engine compartment of a motorhome or hidden elsewhere in caravans.
Dimensions H, W, D
80 x 80 x 48 mm
Power consumption in standby
< 0,1 mA
Power consumption at active siren
approximately 250 mA, limited to approximately 500 mA
Power supply
8 pcs replaceable AA alkaline batteries
Density
IP66
Radio communication
868 MHz band
The siren is powered from the siren controller and mounted together with the controller.
Dimensions H, W, D
53 x 50 x 63 mm
Voltage
6 – 16 V
Power consumption max at active siren
290 mA
Volume
123 dB of 10 cm. distance
Frequency
2 – 4 KHz
Raveien 438
3239 Sandefjord, Norway