Menu
Menu
Avara Basic Plus is a connected (online) alarm based on Avara Basic. The alarm gives you a number of benefits beyond what you find in Avara Basic. The modem included in this package allows you to communicate with the alarm system via your mobile phone. You can configure who should receive alarms, so that family or neighbors are also notified.
With Avara Basic Plus, you can monitor indoor climate in your motorhome or caravan. You get an overview of the temperature inside the unit and the humidity. In addition, you can see the voltage on the living area battery.
There is a GPS receiver in the modem. This allows you to display the position of your motorhome/caravan on a map. This location can be shared with family and friends and used for tracking in the event of theft.
If you are technically skilled, you can install avara basic plus yourself. If you are unsure, we recommend that you ask your dealer to install the alarm.
Avara Basic Plus belongs to a subscription that provides access to "My Account" at Avara. When the subscription is activated, it opens for communication between the modem and Avara's cloud solution.
From "My Page" you can operate your Avara alarm online, view alarm history, locate your motorhome/caravan, share your location with friends and family and more. Here you also control your privacy settings and have full control over your own data.
Avara's cloud solution will be further developed with new features in the future. Among other things, you can now install the mouse detector Avara Mouse and the temperature sensors Avara Temp as an addition to your Avara Basic Plus alarm.
Later upgrade
If you later want to upgrade to Avara Premium, this can be done by purchasing optional moisture sensors. You can also expand Avara Basic Plus with more detectors if you wish (often in garages and hatches where you want increased security).
1 pcs.
Main unit
1 pcs.
Modem with GPS receiver (subscription required)
3 pcs.
Burglary Detectors*
2 pcs.
External detectors with light*
1 pcs.
Propane gas detector*
1 pcs.
Siren controller
1 pcs.
Siren
2 pcs.
Key tags for activating/disabling burglar alarm*
1 pcs.
Mounting kit with strips and cables
* Multiple detectors can be purchased if needed
The alarm's main control panel and is used to operate the alarm/night alarm inside the motorhome/caravan. Contains motion detector (PIR), CO detector and smoke detector, humidity and temperature sensor in addition to G-shock sensor. The combination of CO detector and smoke detector increases safety for early detection of fire. The CO detector and smoke detector are alwaysonand are not switched off when the alarm is deactivated. The main unit is placed above the living room door in your motorhome/caravan.
Features
Control panel for operation of burglar alarm and night alarm
Optical smoke detector
Motion detector
CO detector (carbon monoxide)
NFCreader for code chip
G-shocksensor
Motion Detector
Passive infrared
Dimensions H, W, D
31x72x102mm
NFC
13.54Mhz
Power consumption
approx. 0.1 mA.
Power supply
3 internal replaceable AA alkaline batteries
Radio communication
868 MHz band
Motion sensor that is placed in doorways, cargo areas and hatches and detects any movement in/out of the motorhome/caravan. 3 intrusion detectors are included in the basic package, and more can be ordered if required. The detectors have an internal battery with a long life expectancy.
Dimensions H, W, D
89x70x24 mm
Motion Detector
Passive infrared
Power consumption
< 0,1 mA.
Power supply
3 internal replaceable AA alkaline batteries
Radio communication
868 MHz band
Exterior detectors alert you to unwanted guests outside in Night Alarm mode. The detectors are mounted high up on the exterior wall on each side of the motorhome/caravan so that they cover all doors.
The detectors contain a motion detector that detects movement within approx. 1 - 1.5 meters from the wall and approx. 3 meters to each side. LED light turns on in the event of movement. Two exterior detectors are included in the basic package, and more can be ordered if required, for example for long cars/vehicles.
When Smart Night Alarm or Intruder Alarm is activated, one LED on each detector flashes to show that this vehicle has an active alarm.
The detector can also be used to monitor bicycle racks (night alarm). The detectors have an internal battery with a long life expectancy.
Dimensions H, W, D
50 x 218 x 45 mm
Motion Detector
Passive infrared
Power consumption normal
< 0,1 mA
Power consumption with light
350 mA
Power supply
6 pcs AA alkaline batteries
Density
IP66
Radio communication
868 MHz band
The propane gas detector is connected to a constant 12V power supply and is mounted down by the floor (5-15 cm above the floor). The detector is not switched off when the alarm is deactivated, but is always on for increased security.
A smart function provides a delay of 1 minute before an alarm is sent when gas is detected. This ensures that the accidental, brief and harmless presence of gas does not create unnecessary alarm situations.
The device has a power saving mode that ensures that the battery is not drained when the motorhome/caravan is not in use. You can also connect a backup battery if you remove the main battery during storage.
The detector does not work alone, but must be paired with the Avara main unit in order to sound an alarm.
Dimensions H, W, D
17.5 x 45 x 45 mm
Power consumption normal mode
approx. 20 mA
Power consumption in burglar alarm and save mode
approx. 0.25 mA
Power supply primary
External 5.5 – 15 V DC
Power supply backup
External 5.5 – 15 V DC
Sensitivity
Approx. 0.4% / 20% LEL
Radio communication
868 MHz band
The modem communicates with Avara's cloud solution. Alarm messages and notifications are sent to wherever the owner of the system chooses. The modem also contains a GPS unit for tracking/locating the motorhome/caravan.
The device has a power saving mode that ensures that the battery does not discharge when the motorhome/caravan is not in use. You can also connect your own battery backup in case you remove the main battery during storage.
Dimensions H, W, D
17x83x83mm
Connection
2G/4G/5G/NB-IOT/CAT-M1
Positioning
GPS/Galileo/Glonass/Beidou
NFC
13.54Mhz
Power consumption save mode
approx. 0.25 mA.
Power consumption 4G active
approx. 12 mA.
Power consumption 2G active
approx. 350 mA.
Power supply, primary
5.5-15V DC
Power supply, backup
5.5-15V DC
Radio communication
868 MHz band
The key fobs included in Avara Lite, Avara Basic, Avara Basic Plus and Avara Premium are used to activate and deactivate the burglar alarm.
Dimensions H, W, D
40x32x4mm
Frequency
13.54 MHz
The siren driver is the control unit and power source for the external siren that is triggered in the event of a break-in. It contains AA batteries and should therefore never be connected to an external power source.
The siren driver is mounted concealed together with the siren. It is recommended to mount the siren indoors.
Dimensions H, W, D
80 x 80 x 48 mm
Power consumption in standby
< 0,1 mA
Power consumption at active siren
approximately 250 mA, limited to approximately 500 mA
Power supply
8 pcs replaceable AA alkaline batteries
Density
IP66
Radio communication
868 MHz band
The siren is connected directly to the siren driver and placed together with it. The siren gives a loud audible warning when the intruder alarm is triggered (it is not used in Night alarm mode).
Dimensions H, W, D
53 x 50 x 63 mm
Voltage
6 – 16 V
Power consumption max at active siren
290 mA
Volume
123 dB of 10 cm. distance
Frequency
2 – 4 KHz
Rådhusgaten 91
3290 Stavern
Avara AS
Org. no. 933 097 897
post@avara.no
+47 70 31 00 86